Round baghouse dust collectors and pocket dust collectors
The FILTR’Air dust collector allows dusty air to enter the lower dirty air chamber. The dusty air flow enters an expansion chamber (for the standard non-compact filter), which reduces the entry velocity and enables PRESEPARATION (guaranteeing the removal of a large portion of dust before reaching the filter bags).
The dusty air flow then moves downward into the filter for even distribution throughout the chamber, promoting the settling of larger particles directly for recycling. This ensures a low-speed and uniform upward flow over the filter bags.
The air passes through the bags, depositing dust on the outer surface, and exits through the clean air chamber, complying with emission standards.
The dust collector is controlled by differential pressure readings to initiate cleaning. Sequentially, solenoid valves allow compressed air to reverse flow through each bag, dislodging accumulated dust into the hopper for recycling.
Up to 100,000 m3/h standard capacity,
From 70 to 250 m3/h per m² of filter surface area,
Round baghouse dust collector,
Needle felt filtering media of various types,
Fully automatic high-performance dust collector,
Capable of filtering at high speeds,
Suitable for most dust collection applications up to large-scale or process filters.
Average emission rate below 5 mg/m3, potentially reaching as low as 1 mg/m3.